Journal Description
Membranes
Membranes
is an international, peer-reviewed, open access journal, published monthly online by MDPI, covers the broad aspects of the science and technology of both biological and non-biological membranes. European Membrane Society (EMS), Membrane Society of Australasia (MSA) and Polish Membrane Society (PTMem) are affiliated with Membranes and their members receive discounts on the article processing charges.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), Ei Compendex, PubMed, PMC, CAPlus / SciFinder, Inspec, and other databases.
- Journal Rank: JCR - Q2 (Polymer Science) / CiteScore - Q2 (Chemical Engineering (miscellaneous))
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 13.6 days after submission; acceptance to publication is undertaken in 2.8 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
4.2 (2022);
5-Year Impact Factor:
4.3 (2022)
Latest Articles
Technical Feasibility of Extraction of Freshwater from Produced Water with Combined Forward Osmosis and Nanofiltration
Membranes 2024, 14(5), 107; https://doi.org/10.3390/membranes14050107 - 03 May 2024
Abstract
This study assesses the technical feasibility of a forward-osmosis-based system for concentrating produced water and extracting freshwater. Forward osmosis was combined with nanofiltration, the latter system used to restore the initial osmotic pressure of the diluted draw solutions while concurrently obtaining the final
[...] Read more.
This study assesses the technical feasibility of a forward-osmosis-based system for concentrating produced water and extracting freshwater. Forward osmosis was combined with nanofiltration, the latter system used to restore the initial osmotic pressure of the diluted draw solutions while concurrently obtaining the final freshwater product. Three draw solutions, namely, MgCl2, NaCl, and C3H5NaO2, were initially tested against a synthetic water mimicking a pretreated produced water effluent having an osmotic pressure equal to 16.3 bar. MgCl2 was thus selected for high-recovery experiments. Different combinations of draw solution osmotic pressure (30, 40, 60, 80, and 120) and draw-to-feed initial volume ratios (1, 1.6, and 2.2) were tested at the laboratory scale, achieving recovery rates between roughly 35% and 70% and water fluxes between 4 and 8 L m−2h−1. One-dimensional, system-wide simulations deploying the analytical FO water flux equation were utilized to validate the experiments, investigate co-current and counter-current configurations, and understand the system potential. The diluted draw solutions were then transferred to nanofiltration to regenerate their original osmotic pressure. There, the highest observed rejection was 96.6% with an average flux of 21 L m−2h−1, when running the system to achieve 100% relative recovery.
Full article
(This article belongs to the Topic Membrane Separation Technology Research)
Open AccessArticle
Green and Sustainable Forward Osmosis Process for the Concentration of Apple Juice Using Sodium Lactate as Draw Solution
by
Yuhang Zhao, Chang Liu, Jianju Deng, Panpan Zhang, Shiyuan Feng and Yu Chen
Membranes 2024, 14(5), 106; https://doi.org/10.3390/membranes14050106 - 02 May 2024
Abstract
China is the world’s largest producer and exporter of concentrated apple juice (CAJ). However, traditional concentration methods such as vacuum evaporation (VE) and freeze concentration cause the loss of essential nutrients and heat-sensitive components with high energy consumption. A green and effective technique
[...] Read more.
China is the world’s largest producer and exporter of concentrated apple juice (CAJ). However, traditional concentration methods such as vacuum evaporation (VE) and freeze concentration cause the loss of essential nutrients and heat-sensitive components with high energy consumption. A green and effective technique is thus desired for juice concentration to improve product quality and sustainability. In this study, a hybrid forward osmosis–membrane distillation (FO–MD) process was explored for the concentration of apple juice using sodium lactate (L-NaLa) as a renewable draw solute. As a result, commercial apple juice could be concentrated up to 65 °Brix by the FO process with an average flux of 2.5 L·m−2·h−1. Most of the nutritional and volatile compounds were well retained in this process, while a significant deterioration in product quality was observed in products obtained by VE concentration. It was also found that membrane fouling in the FO concentration process was reversible, and a periodical UP water flush could remove most of the contaminants on the membrane surface to achieve a flux restoration of more than 95%. In addition, the L-NaLa draw solution could be regenerated by a vacuum membrane distillation (VMD) process with an average flux of around 7.87 L∙m−2∙h−1 for multiple reuse, which further enhanced the long-term sustainability of the hybrid process.
Full article
(This article belongs to the Special Issue Membranes for Food Preservation and Processing)
►▼
Show Figures
Figure 1
Open AccessArticle
Phospholipid Membrane Interactions of Model Ac-WL-X-LL-OH Peptides Investigated by Solid-State Nuclear Magnetic Resonance
by
Nicolai Etwin Alsaker, Øyvind Halskau, Bengt Erik Haug, Nathalie Reuter and Willy Nerdal
Membranes 2024, 14(5), 105; https://doi.org/10.3390/membranes14050105 - 01 May 2024
Abstract
The role of aromatic amino acids in peripheral protein membrane binding has been reported to involve cation–π interactions with choline lipids. In this study, we have investigated the interactions of the model pentapeptide Ac-WL-X-LL-OH (where X = L, Y, F, or W) with
[...] Read more.
The role of aromatic amino acids in peripheral protein membrane binding has been reported to involve cation–π interactions with choline lipids. In this study, we have investigated the interactions of the model pentapeptide Ac-WL-X-LL-OH (where X = L, Y, F, or W) with the phospholipid membrane using solid-state NMR. The effect of guest residue X on the peptide-lipid interactome was complementary to the seminal report on the interfacial hydrophobicity scale by Wimley and White. We found that the phospholipids retained a lamellar phase in the presence of each of the peptides with an aromatic X residue, whereas the Leu peptide perturbed the bilayer to an extent where an additional isotropic phase was observed. The solid-state NMR 13C and 31P data provide additional information on the influence of these short peptides on the membrane that has not been previously reported. The magnitude of membrane perturbation was in the order of guest residue X = L > Y~F > W, which is consistent with the relative amino acid interfacial affinity reported by Wimley and White. Further work is, however, required to uncover the behavior of the peptide and localization in the membrane domain due to ambiguity of the 13C NMR data. We have launched efforts in this regard for the objective of better understanding the role of aromatic amino acids in peripheral membrane protein binding.
Full article
(This article belongs to the Special Issue Protein–Lipid Interactions: Recent Studies, Perspectives, and Challenges)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Soybean Oil on the Improvement of the Functionality of Edible Membrane-Type Food Packaging Films Based on Caseinate–Сarboxymethyl Chitosan Compositions
by
Amal M. A. Mohamed and Hosahalli S. Ramaswamy
Membranes 2024, 14(5), 104; https://doi.org/10.3390/membranes14050104 - 30 Apr 2024
Abstract
Edible film biopolymers are gaining attention to tackle problems of plastic waste and food safety to alleviate environmental problems associated with plastic products in food packaging. In this study, caseinate–carboxymethyl chitosan (CA–CMCH) composite films were made with the incorporation of soybean oil (SO)
[...] Read more.
Edible film biopolymers are gaining attention to tackle problems of plastic waste and food safety to alleviate environmental problems associated with plastic products in food packaging. In this study, caseinate–carboxymethyl chitosan (CA–CMCH) composite films were made with the incorporation of soybean oil (SO) using a casting technique. The influence of different soybean oil concentrations at 0, 0.5, and 1% (w/w) on physical, mechanical, barrier, and surface characteristics of films composed of caseinate–carboxymethyl chitosan (CA–CMCH) was evaluated. The brightest film (L* value of 95.95 ± 0.30) was obtained with the edible film made from the control group of samples with sodium caseinate (NaCA-100; 100% NaCA). The results also indicated that samples with 1% SO in NaCA-75 and CaCA-75 had lower water vapor permeability (WVP), while those with NaCA-50 and CaCA-50 showed higher values of WVP. For mechanical properties, this study found that incorporating soybean oil into the caseinate–carboxymethyl (CA–CMCH) composite films led to an enhancement of both tensile strength and elongation at break. The morphological structures, determined using SEM, of control and composite films showed compact and homogenous surfaces. Overall, the addition of soybean oil contributed to the improvement of the functional properties of the edible films, offering potential solutions to the environmental issues associated with plastic packaging and enhancing the safety and performance of food packaging.
Full article
(This article belongs to the Section Membrane Applications)
Open AccessArticle
Applying Nanofiltration to Decrease Energy Consumption and Sensitivity toward Feed Composition Fluctuations in Salt Production
by
Marian Turek, Krzysztof Mitko and Paweł Skóra
Membranes 2024, 14(5), 103; https://doi.org/10.3390/membranes14050103 - 29 Apr 2024
Abstract
The only currently active industrial-scale plant that uses coal mine brines, located in Czerwionka-Leszczyny, uses ZOD (Zakład Odsalania Dębieńsko, the name of the plant’s former owner) technology, based on mechanical vapor compression evaporators. The plant produces evaporated salt that meets the specifications for
[...] Read more.
The only currently active industrial-scale plant that uses coal mine brines, located in Czerwionka-Leszczyny, uses ZOD (Zakład Odsalania Dębieńsko, the name of the plant’s former owner) technology, based on mechanical vapor compression evaporators. The plant produces evaporated salt that meets the specifications for edible salt; however, the technology is highly energy-consuming. The presented work focuses on the modeling of ZOD technology if applied to the water treatment of the ‘Ziemowit-650’ coal mine. Using the results of bench-scale investigation of brine nanofiltration and a mathematical model of ZOD technology based on Czerwionka-Leszczyny performance, the energy consumption per ton of produced salt was estimated for two cases: (1) ZOD technology treating the ‘Ziemowit-650’ brine and (2) ZOD technology treating the permeate of nanofiltration (NF) working on the ‘Ziemowit-650’ brine. The sensitivity of the system was investigated in the range of −10% to + 10% of Cl−, SO42−, Mg2+, and Ca2+ concentration, assuming that the sodium concentration also changes to meet the electroneutrality requirement. The results show that nanofiltration pretreatment not only decreases energy consumption but it also makes salt production less sensitive to fluctuations in feed water composition.
Full article
(This article belongs to the Special Issue Design and Optimisation of Membrane Technologies for Wastewater Treatment)
Open AccessArticle
Transmembrane Chemical Absorption Process for Recovering Ammonia as an Organic Fertilizer Using Citric Acid as the Trapping Solution
by
Ricardo Reyes Alva, Marius Mohr and Susanne Zibek
Membranes 2024, 14(5), 102; https://doi.org/10.3390/membranes14050102 - 29 Apr 2024
Abstract
Membrane contactors are among the available technologies that allow a reduction in the amount of ammoniacal nitrogen released into the environment through a process called transmembrane chemical absorption (TMCA). This process can be operated with different substances acting as trapping solutions; however, strong
[...] Read more.
Membrane contactors are among the available technologies that allow a reduction in the amount of ammoniacal nitrogen released into the environment through a process called transmembrane chemical absorption (TMCA). This process can be operated with different substances acting as trapping solutions; however, strong inorganic acids have been studied the most. The purpose of this study was to demonstrate, at laboratory scale, the performance of citric acid as a capturing solution in TMCA processes for recovering ammonia as an organic fertilizer from anaerobic digestor reject water using membrane contactors in a liquid–liquid configuration and to compare it with the most studied solution, sulfuric acid. The experiments were carried out at 22 °C and 40 °C and with a feed water pH of 10 and 10.5. When the system was operated at pH 10, the rates of recovered ammonia from the feed solution obtained with citric acid were 10.7–16.5 percentage points (pp) lower compared to sulfuric acid, and at pH 10.5, the difference decreased to 5–10 pp. Under all tested conditions, the water vapor transport in the system was lower when using citric acid as the trapping solution, and at pH 10 and 40 °C, it was 5.7 times lower. When estimating the operational costs for scaling up the system, citric acid appears to be a better option than sulfuric acid as a trapping solution, but in both cases, the process was not profitable under the studied conditions.
Full article
(This article belongs to the Topic Technologies for Wastewater and Sludge Treatment)
Open AccessCorrection
Correction: Dobrovskiy et al. The Transport Properties of Semi-Crystalline Polyetherimide BPDA-P3 in Amorphous and Ordered States: Computer Simulations. Membranes 2022, 12, 856
by
Alexey Y. Dobrovskiy, Victor M. Nazarychev, Igor V. Volgin and Sergey V. Lyulin
Membranes 2024, 14(5), 101; https://doi.org/10.3390/membranes14050101 - 29 Apr 2024
Abstract
The authors wish to make a change to the published paper [...]
Full article
(This article belongs to the Section Membrane Physics and Theory)
►▼
Show Figures
Figure 7
Open AccessEditorial
Editorial for the Special Issue “Preparation and Application of Advanced Functional Membranes”
by
Annarosa Gugliuzza and Cristiana Boi
Membranes 2024, 14(5), 100; https://doi.org/10.3390/membranes14050100 - 26 Apr 2024
Abstract
Membrane science is a discipline that cuts across almost all fields of research and experimentation [...]
Full article
(This article belongs to the Special Issue Preparation and Application of Advanced Functional Membranes)
►▼
Show Figures
Figure 1
Open AccessReview
A Short Review of Advances in MOF Glass Membranes for Gas Adsorption and Separation
by
Zichen Li, Yumei Wang, Jianxin Zhang, Shiqi Cheng and Yue Sun
Membranes 2024, 14(5), 99; https://doi.org/10.3390/membranes14050099 - 25 Apr 2024
Abstract
The phenomenon of melting in metal–organic frameworks (MOFs) has recently garnered attention. Crystalline MOF materials can be transformed into an amorphous glassy state through melt-quenching treatment. The resulting MOF glass structure eliminates grain boundaries and retains short-range order while exhibiting long-range disorder. Based
[...] Read more.
The phenomenon of melting in metal–organic frameworks (MOFs) has recently garnered attention. Crystalline MOF materials can be transformed into an amorphous glassy state through melt-quenching treatment. The resulting MOF glass structure eliminates grain boundaries and retains short-range order while exhibiting long-range disorder. Based on these properties, it emerges as a promising candidate for high-performance separation membranes. MOF glass membranes exhibit permanent and accessible porosity, allowing for selective adsorption of different gas species. This review summarizes the melting mechanism of MOFs and explores the impact of ligands and metal ions on glassy MOFs. Additionally, it presents an analysis of the diverse classes of MOF glass composites, outlining their structures and properties, which are conducive to gas adsorption and separation. The absence of inter-crystalline defects in the structures, coupled with their distinctive mechanical properties, renders them highly promising for industrial gas separation applications. Furthermore, this review provides a summary of recent research on MOF glass composite membranes for gas adsorption and separation. It also addresses the challenges associated with membrane production and suggests future research directions.
Full article
(This article belongs to the Special Issue Recent Advances of Metal–Organic Framework Membranes for Separation Process)
►▼
Show Figures
Figure 1
Open AccessArticle
Enhancing the Permeate Flux Improvement of Direct Contact Membrane Distillation Modules with Inserted S-Ribs Carbon-Fiber Filaments
by
Chii-Dong Ho, Yi-Wun Wang, Yi Chao, Thiam Leng Chew, Ming-Shen Jiang, Jian-Har Chen and Ching-Yu Li
Membranes 2024, 14(5), 98; https://doi.org/10.3390/membranes14050098 - 25 Apr 2024
Abstract
►▼
Show Figures
Three widths of manufacturing S-ribs carbon-fiber filaments acting as turbulence promoters were implemented into the flow channel of direct contact membrane distillation (DCMD) modules to augment the permeate flux improvement in the present study. Attempts to reduce the disadvantageous temperature polarization effect were
[...] Read more.
Three widths of manufacturing S-ribs carbon-fiber filaments acting as turbulence promoters were implemented into the flow channel of direct contact membrane distillation (DCMD) modules to augment the permeate flux improvement in the present study. Attempts to reduce the disadvantageous temperature polarization effect were made by inserting S-ribs turbulence promoters in improving pure water productivity, in which both heat- and mass-transfer boundary layers were diminished due to creating vortices in the flow pattern and increasing turbulence intensity. The temperature polarization coefficient was studied and found to enhance device performance (less thermal resistance) under inserting various S-ribs carbon-fiber thicknesses and operating both cocurrent- and countercurrent-flow patterns. The permeate fluxes in the DCMD modules with inserted S-ribs carbon-fiber turbulence promoters were investigated theoretically by developing the mathematical modeling equations and were conducted experimentally with various design and operating parameters. The theoretical predictions and experimental results exhibited a great potential to considerably achieve permeate flux enhancement in the new design of the DCMD system. The DCMD module with inserted S-ribs carbon-fiber turbulence promoters in the flow channel could provide a relative permeate flux enhancement up to 37.77% under countercurrent-flow operations in comparisons with the module of using the empty channel. An economic consideration on both permeate flux enhancement and power consumption increment for the module with inserted S-ribs carbon-fiber filaments was also delineated.
Full article
Figure 1
Open AccessArticle
Enrichment of Nutmeg Essential Oil from Oil-in-Water Emulsions with PAN-Based Membranes
by
Huilan Yin, Haoyu Zhang, Jiaoyang Cui, Qianlian Wu, Linlin Huang, Jiaoyue Qiu, Xin Zhang, Yanyu Xiang, Bo Li, Hongbo Liu, Zhishu Tang, Yue Zhang and Huaxu Zhu
Membranes 2024, 14(5), 97; https://doi.org/10.3390/membranes14050097 - 25 Apr 2024
Abstract
This study used polyacrylonitrile (PAN) and heat-treated polyacrylonitrile (H-PAN) membranes to enrich nutmeg essential oils, which have more complex compositions compared with common oils. The oil rejection rate of the H-PAN membrane was higher than that of the PAN membrane for different oil
[...] Read more.
This study used polyacrylonitrile (PAN) and heat-treated polyacrylonitrile (H-PAN) membranes to enrich nutmeg essential oils, which have more complex compositions compared with common oils. The oil rejection rate of the H-PAN membrane was higher than that of the PAN membrane for different oil concentrations of nutmeg essential oil-in-water emulsions. After heat treatment, the H-PAN membrane showed a smaller pore size, narrower pore size distribution, a rougher surface, higher hydrophilicity, and higher oleophobicity. According to the GC-MS results, the similarities of the essential oils enriched by the PAN and H-PAN membranes to those obtained by steam distillation (SD) were 0.988 and 0.990, respectively. In addition, these two membranes also exhibited higher essential oil rejection for Bupleuri Radix, Magnolia Officinalis Cortex, Caryophylli Flos, and Cinnamomi Cortex essential oil-in-water emulsions. This work could provide a reference for membrane technology for the non-destructive separation of oil with complex components from oil-in-water emulsions.
Full article
(This article belongs to the Special Issue Application of Membrane Technology in Foods and Natural Products)
►▼
Show Figures
Figure 1
Open AccessOpinion
Membrane Heteroreceptor Complexes as Second-Order Protein Modulators: A Novel Integrative Mechanism through Allosteric Receptor–Receptor Interactions
by
Marina Mirchandani-Duque, Malak Choucri, Juan C. Hernández-Mondragón, Minerva Crespo-Ramírez, Catalina Pérez-Olives, Luca Ferraro, Rafael Franco, Miguel Pérez de la Mora, Kjell Fuxe and Dasiel O. Borroto-Escuela
Membranes 2024, 14(5), 96; https://doi.org/10.3390/membranes14050096 - 25 Apr 2024
Abstract
Bioluminescence and fluorescence resonance energy transfer (BRET and FRET) together with the proximity ligation method revealed the existence of G-protein-coupled receptors, Ionotropic and Receptor tyrosine kinase heterocomplexes, e.g., A2AR–D2R, GABAA–D5R, and FGFR1–5-HT1AR heterocomplexes. Molecular integration takes place through allosteric receptor–receptor interactions in heteroreceptor
[...] Read more.
Bioluminescence and fluorescence resonance energy transfer (BRET and FRET) together with the proximity ligation method revealed the existence of G-protein-coupled receptors, Ionotropic and Receptor tyrosine kinase heterocomplexes, e.g., A2AR–D2R, GABAA–D5R, and FGFR1–5-HT1AR heterocomplexes. Molecular integration takes place through allosteric receptor–receptor interactions in heteroreceptor complexes of synaptic and extra-synaptic regions. It involves the modulation of receptor protomer recognition, signaling and trafficking, as well as the modulation of behavioral responses. Allosteric receptor–receptor interactions in hetero-complexes give rise to concepts like meta-modulation and protein modulation. The introduction of receptor–receptor interactions was the origin of the concept of meta-modulation provided by Katz and Edwards in 1999, which stood for the fine-tuning or modulation of nerve cell transmission. In 2000–2010, Ribeiro and Sebastiao, based on a series of papers, provided strong support for their view that adenosine can meta-modulate (fine-tune) synaptic transmission through adenosine receptors. However, another term should also be considered: protein modulation, which is the key feature of allosteric receptor–receptor interactions leading to learning and consolidation by novel adapter proteins to memory. Finally, it must be underlined that allosteric receptor–receptor interactions and their involvement both in brain disease and its treatment are of high interest. Their pathophysiological relevance has been obtained, especially for major depressive disorder, cocaine use disorder, and Parkinson’s disease.
Full article
(This article belongs to the Section Biological Membrane Composition and Structures)
►▼
Show Figures
Figure 1
Open AccessArticle
Preparation and Investigation of Cellulose Acetate/Gelatin Janus Nanofiber Wound Dressings Loaded with Zinc Oxide or Curcumin for Enhanced Antimicrobial Activity
by
Tianyue Huang, YuE Zeng, Chaofei Li, Zhengqing Zhou, Yukang Liu, Jie Xu, Lean Wang, Deng-Guang Yu and Ke Wang
Membranes 2024, 14(5), 95; https://doi.org/10.3390/membranes14050095 - 23 Apr 2024
Abstract
The skin, as the largest organ, serves as a protective barrier against external stimuli. However, when the skin is injured, wound healing becomes a complex process influenced by physiological conditions, bacterial infections, and inflammation. To improve the process of wound healing, a variety
[...] Read more.
The skin, as the largest organ, serves as a protective barrier against external stimuli. However, when the skin is injured, wound healing becomes a complex process influenced by physiological conditions, bacterial infections, and inflammation. To improve the process of wound healing, a variety of wound dressings with antibacterial qualities have been created. Electrospun nanofibers have gained significant attention in wound dressing research due to their large specific surface area and unique structure. One interesting method for creating Janus-structured nanofibers is side-by-side electrospinning. This work used side-by-side electrospinning to make cellulose acetate/gelatin Janus nanofibers. Curcumin and zinc oxide nanoparticles were added to these nanofibers. We studied Janus nanofibers’ physicochemical characteristics and abilities to regulate small-molecule medication release. Janus nanofibers coated with zinc oxide nanoparticles and curcumin were also tested for antibacterial activity. The Janus nanofibers with specified physicochemical characteristics were successfully fabricated. Nanofibers released small-molecule medicines in a controlled manner. Additionally, the Janus nanofibers loaded with curcumin exhibited excellent antibacterial capabilities. This research contributes to the development of advanced wound dressings for promoting wound healing and combating bacterial infections.
Full article
(This article belongs to the Special Issue Advances in Membranes Fabricated via Electrospinning)
►▼
Show Figures
Figure 1
Open AccessCommunication
Production of Stable Electrically Conductive PVDF Membranes Based on Polydopamine-Polyethyleneimine—Assisted Deposition of Carbon Nanotubes
by
Abdelrahman M. Awad and Charles-François de Lannoy
Membranes 2024, 14(4), 94; https://doi.org/10.3390/membranes14040094 - 20 Apr 2024
Abstract
Electrically conductive membranes (ECMs) have emerged as a multifunctional separation technology that integrates membrane filtration with electrochemical reactions. Physical stability remains a critical challenge for ECMs synthesized by coating polymer membranes with conductive materials. In this article, polydopamine (PDA) and polyethyleneimine (PEI) were
[...] Read more.
Electrically conductive membranes (ECMs) have emerged as a multifunctional separation technology that integrates membrane filtration with electrochemical reactions. Physical stability remains a critical challenge for ECMs synthesized by coating polymer membranes with conductive materials. In this article, polydopamine (PDA) and polyethyleneimine (PEI) were used to facilitate the synthesis of significantly more stable ECMs using poly(vinylidene fluoride) (PVDF) ultrafiltration membranes and carbon nanotubes (CNTs). Four different synthesis methods were compared in terms of the final surface stability and separation properties: (1) CNTs deposited on PEI-crosslinked PDA-coated PVDF membranes, (2) PEI-crosslinked CNTs deposited on PDA-coated PVDF, (3) PDA, PEI and CNTs sequentially deposited layer-by-layer on PVDF, and (4) PEI-crosslinked PDA deposited on CNT-coated PVDF. The results revealed that method 1 generated ECMs with the greatest physical stability, highest electrical conductivity (18,518 S/m), and sufficient permeability (395.2 L/(m2·h·bar). In comparison, method 2 resulted in membranes with the highest permeability (2128.5 L/(m2·h·bar), but with low surface conductivity (502 S/m) and poor physical stability (i.e., 53–75% lower peel-off forces compared to other methods). Overall, methods 1, 3, and 4 can be used to make highly conductive membranes with a 97–99% removal of methyl orange by electrochemical degradation at −3 V.
Full article
(This article belongs to the Special Issue Composite Conducting Membranes: Preparation, Properties, and Applications-Volume 2)
►▼
Show Figures
Figure 1
Open AccessEditorial
Revisiting Membranes—An Open Access Membrane Science and Technology Journal
by
Spas D. Kolev
Membranes 2024, 14(4), 93; https://doi.org/10.3390/membranes14040093 - 19 Apr 2024
Abstract
Membranes is celebrating its 13th anniversary this year [...]
Full article
Open AccessArticle
Removal of Methylene Blue Dye from Aqueous Solutions Using Polymer Inclusion Membrane Containing Calix[4]pyrrole
by
Anna Nowik-Zajac, Iwona Zawierucha, Jakub Lagiewka, Karolina Jaksender, Katarzyna Witt, Grzegorz Malina and Vira Sabadash
Membranes 2024, 14(4), 92; https://doi.org/10.3390/membranes14040092 - 17 Apr 2024
Abstract
The effective purification of aqueous solutions of methylene blue dye was tested using polymer inclusion membranes (PIMs) that contained cellulose triacetate (CTA) as a polymer base, o-nitrophenyl octyl ether (o-NPOE) as a plasticizer, and meso-tetra methyl tetrakis-[methyl-2-(4-acetlphenoxy)] calix[4]pyrrole (KP) as
[...] Read more.
The effective purification of aqueous solutions of methylene blue dye was tested using polymer inclusion membranes (PIMs) that contained cellulose triacetate (CTA) as a polymer base, o-nitrophenyl octyl ether (o-NPOE) as a plasticizer, and meso-tetra methyl tetrakis-[methyl-2-(4-acetlphenoxy)] calix[4]pyrrole (KP) as a carrier. Scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy were used to define the microstructure and surface of PIMs. Experimental results showed that, with an increased concentration of methylene blue in an aqueous solution, the removal percentage also increased. Further observation showed that the flux increased with the rise in the source phase pH values from 3 to 10. The carrier and plasticizer content in the membrane significantly influenced the membrane’s transport properties. The optimal composition of the membrane in percent by weight for KP was 74% plasticizer; 18% support, and 8% carrier. The maximum MB removal (93.10%) was achieved at 0.10 M HCl solution as the receiving phase. It was shown that the membrane with optimal composition showed good reusability and enabled the easy and spontaneous separation of methylene blue from aqueous solutions.
Full article
(This article belongs to the Collection Polymeric Membranes: Science, Materials and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Zeolite-Based Poly(vinylidene fluoride) Ultrafiltration Membrane: Characterization and Molecular Weight Cut-Off Estimation with Support Vector Regression Modelling
by
Mieow Kee Chan, Syee Jia Tan, Andrew T. H. Yeow, Sok Choo Ng and Woei Jye Lau
Membranes 2024, 14(4), 91; https://doi.org/10.3390/membranes14040091 - 16 Apr 2024
Abstract
►▼
Show Figures
Zeolite serves as a promising additive for enhancing the hydrophilicity of polymeric membranes, yet its utilization for bolstering the mechanical strength of the membrane remains limited. In this study, poly(vinylidene fluoride) (PVDF) membranes were modified by incorporating various concentrations of zeolite (0.5–2 wt%)
[...] Read more.
Zeolite serves as a promising additive for enhancing the hydrophilicity of polymeric membranes, yet its utilization for bolstering the mechanical strength of the membrane remains limited. In this study, poly(vinylidene fluoride) (PVDF) membranes were modified by incorporating various concentrations of zeolite (0.5–2 wt%) to improve not only their mechanical properties, but also other features for water filtration. Membranes with and without zeolite incorporation were fabricated via a dry–wet phase inversion technique, followed by the application of a series of characterization techniques in order to study their morphological structure, mechanical strength, and hydrophilicity. The membrane filtration performance for each membrane was evaluated based on pure water flux and Bovine Serum Albumin (BSA) rejection. Field-Emission Scanning Electron Microscopy (FESEM) images revealed a dense, microvoid-free structure across all of the PVDF membranes, contributing to a high pristine PVDF membrane tensile strength of 14 MPa. The addition of 0.5 wt% zeolite significantly improved the tensile strength up to 19.4 MPa. Additionally, the incorporation of 1 wt% zeolite into PVDF membrane yielded improvements in membrane hydrophilicity (contact angle of 67.84°), pure water flux (63.49% increase), and high BSA rejection (95.76%) compared to pristine PVDF membranes. To further improve the characterization of the zeolite-modified PVDF membranes, the Support Vector Regression (SVR) model was adopted to estimate the molecular weight cut off (MWCO) of the membranes. A coefficient of determination (R2) value of 0.855 was obtained, suggesting that the SVR model predicted the MWCO accurately. The findings of this study showed that the utilization of zeolite is promising in enhancing both the mechanical properties and separation performance of PVDF membranes for application in ultrafiltration processes.
Full article
Figure 1
Open AccessArticle
Influence of Process Parameters on the Efficiency of Pervaporation Pilot ECO-001 Plant for Raw Ethanol Dehydration
by
Anna Kujawska, Wojciech Kujawski, Wiesław Capała, Urszula Kiełkowska, Marek Plesnar and Joanna Kujawa
Membranes 2024, 14(4), 90; https://doi.org/10.3390/membranes14040090 - 14 Apr 2024
Abstract
Pervaporation is a membrane-based process used for the separation of liquid mixtures. As this membrane process is governed by the differences in the sorption and diffusivities of separated components, close boiling mixtures and azeotropic mixtures can effectively be separated. The dehydration of ethanol
[...] Read more.
Pervaporation is a membrane-based process used for the separation of liquid mixtures. As this membrane process is governed by the differences in the sorption and diffusivities of separated components, close boiling mixtures and azeotropic mixtures can effectively be separated. The dehydration of ethanol is the most common application of hydrophilic pervaporation. The pilot scale properties of hydrophilic composite poly(vinyl alcohol) PVA membrane (PERVAPTM 2200) in contact with wet raw bioethanol are presented. The wet raw bioethanol was composed of ethanol (82.4–89.6 wt%), water (5.9–8.5 wt%), methanol (2.3–6.9 wt%), cyclohexane (0.2–2.4 wt%), higher alcohols (0.2–1.3 wt%), and acetaldehyde (0.004–0.030 wt%). All experiments were performed using a SULZER ECO-001 plant equipped with a 1.5 m2 membrane module. The efficiency of the dehydration process (i.e., membrane selectivity, permeate flux, degree of dehydration) was discussed as a function of the following parameters: the feed temperature, the feed composition, and the feed flow rate through the module. It was found that the low feed flow rate influenced the dehydration efficiency as the enthalpy of evaporation caused a high temperature drop in the module (around 25 °C at a feed flow rate equal to 5 kg h−1). The separation coefficient during pervaporation was in the range of 600–1200, depending on the feed composition. The increase in temperature augmented the permeation flux and shortened the time needed to reach the assumed level of dehydration. It was revealed that dehydration by pervaporation using ECO-001 pilot plant is an efficient process, allowing also to investigate the influence of various parameters on the process efficiency.
Full article
(This article belongs to the Section Membrane Processing and Engineering)
►▼
Show Figures
Figure 1
Open AccessArticle
Studying the Effects of Dissolved Noble Gases and High Hydrostatic Pressure on the Spherical DOPC Bilayer Using Molecular Dynamic Simulations
by
Eugeny Pavlyuk, Irena Yungerman, Alice Bliznyuk and Yevgeny Moskovitz
Membranes 2024, 14(4), 89; https://doi.org/10.3390/membranes14040089 - 12 Apr 2024
Abstract
Fine-grained molecular dynamics simulations have been conducted to depict lipid objects enclosed in water and interacting with a series of noble gases dissolved in the medium. The simple point-charge (SPC) water system, featuring a boundary composed of 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) molecules, maintained stability throughout
[...] Read more.
Fine-grained molecular dynamics simulations have been conducted to depict lipid objects enclosed in water and interacting with a series of noble gases dissolved in the medium. The simple point-charge (SPC) water system, featuring a boundary composed of 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) molecules, maintained stability throughout the simulation under standard conditions. This allowed for the accurate modeling of the effects of hydrostatic pressure at an ambient pressure of 25 bar. The chosen pressure references the 240 m depth of seawater: the horizon frequently used by commercial divers, who comprise the primary patient population of the neurological complication of inert gas narcosis and the consequences of high-pressure neurological syndrome. To quantify and validate the neurological effects of noble gases and discriminate them from high hydrostatic pressure, we reduced the dissolved gas molar concentration to 1.5%, three times smaller than what we previously tested for the planar bilayer (3.5%). The nucleation and growth of xenon, argon and neon nanobubbles proved consistent with the data from the planar bilayer simulations. On the other hand, hyperbaric helium induces only a residual distorting effect on the liposome, with no significant condensed gas fraction observed within the hydrophobic core. The bubbles were distributed over a large volume—both in the bulk solvent and in the lipid phase—thereby causing substantial membrane distortion. This finding serves as evidence of the validity of the multisite distortion hypothesis for the neurological effect of inert gases at high pressure.
Full article
(This article belongs to the Section Biological Membrane Dynamics and Computation)
►▼
Show Figures
Figure 1
Open AccessArticle
Identification of Fouling Occurring during Coupled Electrodialysis and Bipolar Membrane Electrodialysis Treatment for Tofu Whey Protein Recovery
by
Rosie Deschênes Gagnon, Marie-Ève Langevin, Florence Lutin and Laurent Bazinet
Membranes 2024, 14(4), 88; https://doi.org/10.3390/membranes14040088 - 11 Apr 2024
Abstract
►▼
Show Figures
Tofu whey, a by-product of tofu production, is rich in nutrients such as proteins, minerals, fats, sugars and polyphenols. In a previous work, protein recovery from tofu whey was studied by using a coupled environmental process of ED + EDBM to valorize this
[...] Read more.
Tofu whey, a by-product of tofu production, is rich in nutrients such as proteins, minerals, fats, sugars and polyphenols. In a previous work, protein recovery from tofu whey was studied by using a coupled environmental process of ED + EDBM to valorize this by-product. This process allowed protein recovery by reducing the ionic strength of tofu whey during the ED process and acidifying the proteins to their isoelectric point during EDBM. However, membrane fouling was not investigated. The current study focuses on the fouling of membranes at each step of this ED and EDBM process. Despite a reduction in the membrane conductivities and some changes in the mineral composition of the membranes, no scaling was evident after three runs of the process with the same membranes. However, it appeared that the main fouling was due to the presence of isoflavones, the main polyphenols in tofu whey. Indeed, a higher concentration was observed on the AEMs, giving them a yellow coloration, while small amounts were found in the CEMs, and there were no traces on the BPMs. The glycosylated forms of isoflavones were present in higher concentrations than the aglycone forms, probably due to their high amounts of hydroxyl groups, which can interact with the membrane matrices. In addition, the higher concentration of isoflavones on the AEMs seems to be due to a combination of electrostatic interactions, hydrogen bonding, and π–π stacking, whereas only π–π stacking and hydrogen bonds were possible with the CEMs. To the best of our knowledge, this is the first study to investigate the potential fouling of BPMs by polyphenols, report the fouling of IEMs by isoflavones and propose potential interactions.
Full article
Figure 1
Journal Menu
► ▼ Journal Menu-
- Membranes Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Energies, Membranes, Minerals, Toxics, Water
Renewable Energies for Water Treatment and Reuse in Mining Industries
Topic Editors: Sergio Santoro, Francesco Chidichimo, Barbara Ruffino, Lourdes García-RodríguezDeadline: 30 June 2024
Topic in
Biomedicines, JCM, Membranes, Metabolites, Reports
Nephrology and Dialysis: From Bench to Bedside
Topic Editors: Eiichi Sato, Tsukasa NakamuraDeadline: 31 July 2024
Topic in
Energies, IJMS, Membranes, Separations, Water
Membrane Separation Technology Research
Topic Editors: Chenxiao Jiang, Zhe Yang, Ying MeiDeadline: 15 September 2024
Topic in
AppliedChem, ChemEngineering, Energies, Membranes, Processes, Recycling, Separations, Water
Capacitive Deionization Technology for Water Treatment
Topic Editors: Shenxu Bao, Xin ZhangDeadline: 30 September 2024
Conferences
Special Issues
Special Issue in
Membranes
Women’s Special Issue Series: Membrane Materials and Applications
Guest Editor: Isabel C. EscobarDeadline: 10 May 2024
Special Issue in
Membranes
Advances in Symmetric and Asymmetric Lipid Membranes
Guest Editor: Thais A. EnokiDeadline: 31 May 2024
Special Issue in
Membranes
Advanced Flexible Membranes for Next-Generation Electrochemical Energy Devices
Guest Editor: Yasser Ashraf GandomiDeadline: 20 June 2024
Special Issue in
Membranes
Biological Membrane Dynamics and Reorganization Induced by Light Changes
Guest Editors: Radka Vladkova, Sashka Krumova, Nia PetrovaDeadline: 30 June 2024
Topical Collections
Topical Collection in
Membranes
Applied, Engineering and Environmental Microbiology and Biofilms
Collection Editors: Gamini Seneviratne, Yanrui Ye, Zhenbo Xu, Guanglei Qiu, Jing Lin, Jian Sun
Topical Collection in
Membranes
Featured Reviews in Membrane Science
Collection Editors: Spas D. Kolev, Tae-Hyun Bae, Laurent Bazinet, Claus Hélix-Nielsen
Topical Collection in
Membranes
Feature Papers in Membrane Bio-Reactor Valorisation
Collection Editors: Gaetano Di Bella, Santo Fabio Corsino
Topical Collection in
Membranes
Feature Papers in Biological Membrane Composition and Structures
Collection Editor: Shiro Suetsugu